FixVault
Home › Acura › 2003 › MDX Base › Repair and Diagnosis › External Pages › Different car › Section 48 (PGM-FI System) › CKP Sensor Replacement

CKP Sensor Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the auto-tensioner to remove tension from the drive belt, then remove the belt (see DRIVE BELT INSPECTION ).
  2. Remove the crankshaft pulley (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION ).
  3. Remove the upper and lower front covers from the engine (see TIMING BELT INSPECTION ).
  4. Remove the CKP sensor (A) from the oil pump.
    Fig 1: CKP Sensor From Oil Pump With Torque Specifications
    G05485133Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the parts in the reverse order of removal.
  6. Do the CKP pattern clear/CKP pattern learn procedure (see CRANK (CKP) PATTERN CLEAR/CRANK (CKP) PATTERN LEARN ).
About FixVault