FixVault
Home › Acura › 2003 › MDX Base › Repair and Diagnosis › External Pages › Different car › Section 48 (PGM-FI System) › CMP Sensor Replacement

CMP Sensor Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt (see TIMING BELT REMOVAL ).
  2. Remove the front camshaft pulley (CMP sensor pulse plate) (A).
    Fig 1: Front Camshaft Pulley (CMP Sensor Pulse Plate) With Torque Specifications
    G05485131Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the CMP sensor connector (B), then remove the back cover (C).
  4. Remove the CMP sensor (A) from the back cover.
    Fig 2: CMP Sensor From Back Cover With Torque Specification
    G05485132Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the parts in the reverse order of removal. Install the timing belt (see TIMING BELT INSTALLATION ).
  6. Do the CKP pattern clear/CKP pattern learn procedure (see CRANK (CKP) PATTERN CLEAR/CRANK (CKP) PATTERN LEARN ).
About FixVault