FixVault
Home › Acura › 2003 › MDX Base › Repair and Diagnosis › External Pages › Different car › Section 48 (PGM-FI System) › MAP Sensor Replacement

MAP Sensor Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 1 INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the MAP sensor connector (A).
    Fig 1: MAP Sensor Connector With Torque Specification
    G05485123Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screw (B).
  4. Remove the MAP sensor (C).
  5. Install the parts in the reverse order of removal with a new O-ring (D).
About FixVault