FixVault
Home › Acura › 2003 › NSX 3.2 NA2 › Repair and Diagnosis › Engine Performance › System › Engine Controls - System & Component Testing › Fuel Systems › Fuel Control › Fuel Injector Resistor (A/T)

Fuel Injector Resistor (A/T)

  1. Disconnect the fuel injector resistor connector. Fuel injector resistor is in right side of engine compartment. See Figure .
  2. Check for resistance between each of the fuel injector resistor terminals No. 2, 3, 4, 6, 7, 8 and the power terminal, No. 5. See Fig 1 .
    Fig 1: Identifying Fuel Injector Resistor Terminals
    G00107035Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Resistance should be 5-7 ohms.
  4. Replace the fuel injector resistor if any of the resistances are outside of the specification.
About FixVault