Symptom Troubleshooting Index
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Troubleshoot the immobilizer system by the order of the priority shown:SYMPTOM TROUBLESHOOTING INDEX
Order of Priority Symptom Possible cause 1 Immobilizer indicator blinks after the ignition switch is turned to LOCK (0). Symptom troubleshooting (see Symptom Troubleshooting IMMOBILIZER INDICATOR BLINKS ). 2 Engine does not start with the programmed immobilizer key. Symptom troubleshooting (see ENGINE DOES NOT START WITH THE IMMOBILIZER KEY ). 3 Immobilizer indicator does not come on. Check the MIL indication. - If the MIL comes on, go to the PGM-Fl System MIL circuit troubleshooting (see MIL CIRCUIT TROUBLESHOOTING ).
- If the MIL does not come on, replace the gauge control module.
4 Immobilizer indicator does not go off. Symptom troubleshooting (see IMMOBILIZER INDICATOR DOES NOT GO OFF ).