FixVault
Home › Acura › 2004 › MDX Base › Repair and Diagnosis › External Pages › Different car › Section 129 (Keyless/Power Door Locks/Security System) › Tailgate Outer Handle Switch Test/ Replacement

Tailgate Outer Handle Switch Test/ Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tailgate trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
  2. Disconnect the 3P connector (A) from the tailgate outer handle switch (B).
    Fig 1: Identifying 3P Connector Terminals And Tailgate Outer Handle Switch
    G05487903Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the tailgate outer handle switch 3P connector No. 2 and No. 3 terminals.
    • There should be continuity when the tailgate outer handle is pulled.
    • There should be no continuity when the tailgate outer handle is released.
  4. If the continuity is not as specified, remove the two bolts and the tailgate outer handle switch (A).
    Fig 2: Identifying Tailgate Outer Handle Switch With Bolts
    G05487904Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the switch in the reverse order of removal.
About FixVault