FixVault
Home › Acura › 2004 › RSX Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › A/T Interlock System › Shift Lock Solenoid Replacement

Shift Lock Solenoid Replacement

  1. Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect shift lock solenoid connector (A), and remove it from the shift lever bracket base (B).
    Fig 1: Disconnecting Shift Lock Solenoid Connector And Removing From Shift Lever Bracket Base
    G03652008Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the shift lock solenoid with needle-nose pliers.
  4. Install the new shift lock solenoid (C) by aligning the joint of the shift lock solenoid plunger (D) with the tip of the shift lock stop (E).
  5. Install the shift lock solenoid connector on the shift lever bracket base, then connect the connector.
  6. Install the shift lever console panel.
About FixVault