FixVault
Home › Acura › 2004 › RSX Base, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Automatic Transmission) › Shift Lever Installation

Shift Lever Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the shift lever assembly.
    Fig 1: Installing Shift Lever Assembly And Torque Specifications
    G03651936Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Connect transmission gear selection switch/park pin switch connector (A) and shift lock solenoid connector (B), and install the harness clamps (C) on the shift lever bracket base.
  3. Turn the ignition switch ON (II), and verify that the N position indicator comes on.
    Fig 2: Identifying Indicator Light
    G03651937Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the shift cable to the shift lever (see step  5 ). If necessary, adjust the shift cable.
About FixVault