FixVault
Home › Acura › 2004 › TL Standard › Repair and Diagnosis › Engine Mechanical › Lubrication System › Engine Lubrication › Oil Pressure Switch Replacement

Oil Pressure Switch Replacement

  1. Disconnect the oil pressure switch connector, then remove the oil pressure switch.
    Fig 1: Oil Pressure Switch With Torque Specifications
    G03659048Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove any old liquid gasket from the switch and switch mounting hole.
  3. Apply a very small amount of liquid gasket to the new oil pressure switch threads, then install the oil pressure switch.
    NOTE: Using too much liquid gasket may cause liquid gasket to get into the oil passage.
About FixVault