VSA OFF Switch Test

Turn the ignition switch OFF.
Remove the switch panel (A), and disconnect the VSA OFF switch 5P connector (B).

Fig 1: Identifying Switch Panel, VSA OFF Switch 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull out the VSA OFF switch (C) from the switch panel.
Check for continuity between VSA OFF switch 5P connector terminal No. 1 and No. 2. There should be continuity when the switch is pressed, and no continuity when the switch is released.

Fig 2: Checking Continuity Between VSA OFF Switch 5P Connector Terminal No. 1 And No. 2
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between VSA OFF switch 5P connector terminal No. 4 and No. 5. There should be continuity at all times.

Fig 3: Checking Continuity Between VSA OFF Switch 5P Connector Terminal No. 4 And No. 5
Courtesy of AMERICAN HONDA MOTOR CO., INC.