FixVault
Home › Acura › 2004 › TSX Automatic › Repair and Diagnosis › Engine Performance › System › PGM-FI System › ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

  1. Drain the engine coolant (see COOLANT REPLACEMENT ).
  2. Remove the splash shield.
  3. Disconnect ECT sensor 2 2P connector (A), then remove ECT sensor 2 (B).
    Fig 1: ECT Sensor 2 2P Connector And ECT Sensor 2 w/Torque Spec.
    G05490640Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the parts in the reverse order of removal with a new O-ring (C).
  5. Refill the radiator with engine coolant (see COOLANT REPLACEMENT ).
About FixVault