FixVault
Home › Acura › 2004 › TSX Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Drive Plate Removal and Installation

Drive Plate Removal and Installation

  1. Remove the transmission assembly (see TRANSMISSION REMOVAL  ).
  2. Remove the drive plate (A) and the washer (B) from the engine.
    Fig 1: Drive Plate And Washer W/Torque Specification
    G05491411Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the drive plate and the washer on the engine, and tighten the eight bolts in a crisscross pattern in two or more steps.
  4. Install the transmission assembly (see TRANSMISSION INSTALLATION  ).
About FixVault