FixVault
Home › Acura › 2004 › TSX Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Transmission Gear Selection Switch Test

Transmission Gear Selection Switch Test

  1. Remove the center console cover (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect the transmission gear selection switch/ park pin switch connector.
    Fig 1: Identifying Transmission Gear Selection Switch Connector Terminals
    G05491366Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between connector terminals No. 3 and No. 2.

    There should be continuity when the shift lever is in M, and no continuity when the shift lever is in any position other than M.

  4. Check for continuity between connector terminals No. 7 and No. 2.

    There should be continuity when the shift lever is pushed toward the upshift position (+), and no continuity with the shift lever released to the neutral position.

  5. Check for continuity between connector terminals No. 8 and No. 2.
  6. There should be continuity when the shift lever is pulled toward the downshift position (-), and no continuity with the shift lever released to the neutral position.
  7. Replace the transmission gear selection switch/ park pin switch assembly if it failed any of the switch tests.
About FixVault