HFL Switch/HFL-Voice Control Switch Test/Replacement
- Remove the switch cover (A), then remove the two screws.
- Disconnect the 5P connector (B) and remove the HFL switch or HFL-voice control switch (C).
- Measure the resistance between the No. 3 and No. 2 terminals in each switch position according to the table.
HFL Switch (Terminal No. 3 and No. 2)
HFL SWITCH (TERMINAL NO. 3 AND NO. 2)Position Resistance OFF About 1 kΩ HFL Talk button pressed About 185 kΩ HFL Back button pressed About 45 kΩ Navigation Voice Control Switch (Terminal No. 1 and No. 2)
NAVIGATION VOICE CONTROL SWITCH (TERMINAL NO. 1 AND NO. 2)Position Resistance OFF About 10 kΩ Talk button pressed About 2.2 kΩ Back button pressed About 637 kΩ - If the resistance is not as specified, replace the remote switch.