Passenger's Under-dash Fuse/Relay Box Removal/Installation: Removal

Make sure you have the anti-theft codes for the audio system and navigation system (if equipped).
Make sure the ignition switch is OFF.
Disconnect the negative battery cable, then disconnect the positive cable, and wait at least 3 minutes.
Remove the right front door sill trim and right kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
Disconnect the connectors from the passenger's under-dash fuse/relay box (A).

Fig 1: Identifying Passenger's Under-Dash Fuse/Relay Box
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the mounting bolts and the passenger's under-dash fuse/relay box.
Carefully remove the relays by prying under the base of the relay.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.