IMT Actuator Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover (see step 1 on INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
Disconnect the IMT actuator 5P connector (A).

Fig 1: IMT Actuator 5P Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts and the IMT actuator (B).
Install the parts in the reverse order of removal with a new O-ring (C).