FixVault

Speaker Test/Replacement: Subwoofer

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear shelf (see TRIM REMOVAL/INSTALLATION - REAR SHELF AREA ).
  2. Remove the four mounting bolts from the subwoofer (A).
    Fig 1: Identifying Four Mounting Bolts From Subwoofer
    G05463101Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 2P connector (B), and remove the subwoofer.
  4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 Ω.
  5. If the resistance is not as specified, replace the subwoofer.