FixVault
Home › Acura › 2005 › RL › Repair and Diagnosis › External Pages › Different car › Section 61 (Power Windows) › Master Switch Replacement

Master Switch Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's door panel and arm rest (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Remove the screw and disconnect the connectors (A) from the master switch (B), then remove the switch assembly from the door panel.
    Fig 1: Identifying Master Switch And Connectors
    G05462758Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the four mounting screws, then remove the master switch from the switch panel.
    Fig 2: Identifying Master Switch Mounting Screws
    G05462759Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install in the reverse order of removal.
  5. Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT  ).
About FixVault