FixVault
Home › Acura › 2005 › RSX Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › General Troubleshooting Information › 2005-2006 Models › PCM Reset Procedure

PCM Reset Procedure

  1. Connect the HDS to the DLC.
  2. Turn the ignition switch ON (II).
  3. Reset the PCM with the HDS.
  4. Turn the ignition switch OFF.
  5. Turn the ignition switch ON (II), and wait 30 seconds.
  6. Turn the ignition switch OFF, and disconnect the HDS from the DLC.
  7. Do the PCM idle learn procedure (see ECM/PCM IDLE LEARN PROCEDURE ).
About FixVault