Door Lock Switch Test

Passenger's Door Lock Switch 

1. Remove the front passenger's inner handle (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
2. Remove the two screws, then remove the door lock switch.
   Fig 1: Identifying Passenger's Door Lock Switch Connector Terminals

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Check for continuity between the terminals.
   • There should be continuity between the No. 1 and No. 2 terminals when the door lock switch is in the LOCK position.
   • There should be no continuity between the No. 1 and No. 2 terminals when the door lock switch is in the neutral position or UNLOCK position.
   • There should be continuity between the No. 2 and No. 3 terminals when the door lock switch is in the UNLOCK position.
   • There should be no continuity between the No. 2 and No. 3 terminals when the door lock switch is in the neutral position or LOCK position.
4. If the continuity is not as specified, replace the switch.