FixVault
Home › Acura › 2006 › RL › Repair and Diagnosis › External Pages › Different car › Section 13 (Fuel Supply System) › Fuel Pump Control Module Replacement

Fuel Pump Control Module Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left trunk side trim panel (see TRIM REMOVAL/INSTALLATION - TRUNK AREA ).
  2. Disconnect the fuel pump control module connector (A).
    Fig 1: Fuel Pump Control Module Connector With Torque Specifications
    G05458331Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (B).
  4. Remove the fuel pump control module (C).
  5. Install the parts in the reverse order of removal.
About FixVault