FixVault
Home › Acura › 2006 › RL › Repair and Diagnosis › External Pages › Different car › Section 15 (Automatic HVAC System) › Dust and Pollen Filter Replacement

Dust and Pollen Filter Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box housing (see GLOVE BOX HOUSING REMOVAL/INSTALLATION ).
  2. Remove the dust and pollen filter assembly from the evaporator.
    Fig 1: Identifying Dust And Pollen Filter Assembly
    G05462501Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the filter (A) from the housing (B), and replace the filter.
    Fig 2: Identifying Filter And Housing
    G05462502Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the evaporator.
About FixVault