DTC 2611: HDD Diag
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST )
- This navigation DTC sets when there is a problem with the HDD.
- Before you troubleshoot, make sure to follow the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION )
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode
- Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu (see SYSTEM DIAGNOSTIC MODE )
- Select the System Links, then select the HDD
Is HDD OK indicated?
YES -Intermittent failure, the system is OK at this time
NO -Go to step 4
- Check the HDD diagnosis
Is the Low Temp indicated?
YES -Make sure the dash temperature is normal, and recheck If the vehicle repeatedly comes back with the DTC, replace the HDD (see HDD Removal/Installation ). If the symptom is still present, replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION )
NO -Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION )