FixVault

With SH-AWD

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk front trim panel (see TRIM REMOVAL/INSTALLATION - TRUNK AREA )
  2. Remove the access panel (A) from the floor
    Fig 1: Identifying Access Panel
    G05990568Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the hose (A) and the FTP sensor 3P connector (B)
    Fig 2: Disconnecting Hose And FTP Sensor 3P Connector
    G05990569Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the FTP sensor (C)
  5. Install the parts in the reverse order of removal with a new O-ring (D) and a new retainer (E)