FixVault

Switch Test/Replacement

  1. Remove the center console front panel (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect the 6P (or 7P*) connector from the seat heater switch (A), then remove the switch.

    *: Front passenger's seat heater switch

    Fig 1: Identifying Seat Heater Switch 6P And 7P Connectors
    G06268878Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Switch Continuity Chart
    G06278109Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the continuity is not as specified, replace the switch.