FixVault
Home › Acura › 2007 › CSX Type-S › Repair and Diagnosis › External Pages › Different car › Section 7 (Engine Lubrication) › Oil Jet Replacement

Oil Jet Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft from the engine block (see CRANKSHAFT AND PISTON REMOVAL )
  2. Remove the oil jet bolt (A), then remove the oil jet (B)
    Fig 1: Oil Jet Bolt And Oil Jet With Torque Specification
    G05987106Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Carefully install the new oil jet and tighten the oil jet bolt
  4. Install the crankshaft (see CRANKSHAFT AND PISTON INSTALLATION )
About FixVault