FixVault
Home › Acura › 2007 › MDX › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation System › Display Unit Removal/Installation

Display Unit Removal/Installation

  1. Remove the dashboard upper visor (see SPEAKER TEST/REPLACEMENT ).
  2. Remove the two screws (A) and bolt (B), then remove the display unit (C).
    Fig 1: Identifying Display Unit, Screws And Bolt
    G05488693Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the navigation display connector (D).
  4. Install the unit in the reverse order of removal. Be careful not to drop the forward bolt behind the dashboard.
About FixVault