Interface Dial Removal/Installation

Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
Remove the harness cover (A).

Fig 1: Identifying Harness Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the interface dial connecter (A), then remove the interface dial (B).
NOTE: If the hard buttons do not work, but the jog dial does, recheck the interface dial connector (A) connection.

Fig 2: Identifying Interface Dial Connecter And Interface Dial
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the dial in reverse order of removal.