FixVault
Home › Acura › 2007 › MDX › Repair and Diagnosis › Body & Frame › Mirrors › Power Mirrors › Power Mirror Actuator Test › Notes

Power Mirror Actuator Test: Notes

NOTE: The power mirror actuator can be tested by using the HDS and following these steps:
  • Select BODY ELECTRICAL from the SYSTEM SELECT menu.
  • Select FUNCTION TEST, and then the appropriate power mirror function test.
  1. Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 16P connector (A) from the power mirror actuator (B).
    Fig 1: Identifying 16P Connector And Power Mirror Actuator
    G05488176Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check actuator operation by connecting power and ground according to the table.

    LEFT 

    Fig 2: Actuator Operation Chart - Left
    G05488177Courtesy of AMERICAN HONDA MOTOR CO., INC.

    RIGHT 

    Fig 3: Actuator Operation Chart - Right
    G05488178Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the mirror fails to work properly, replace the mirror actuator.
About FixVault