FixVault
Home › Acura › 2007 › MDX › Repair and Diagnosis › Engine Performance › System › Fuel And Emissions Systems › General Troubleshooting Information › PCM Reset

PCM Reset

  1. Reset the PCM with the HDS while the engine is stopped.
  2. Turn the ignition switch OFF.
  3. Turn the ignition switch ON (II), and wait 30 seconds.
  4. Turn the ignition switch OFF, and disconnect the HDS from the DLC.
  5. Do the PCM idle learn procedure (see PCM IDLE LEARN PROCEDURE ).
About FixVault