FixVault
Home › Acura › 2007 › MDX › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Climate Control System › Humidity/In-car Temperature Sensor Test › Humidity Sensor Test

Humidity Sensor Test

  1. Remove the humidity/in-car temperature sensor (see HUMIDITY/IN-CAR TEMPERATURE SENSOR REPLACEMENT  ).
  2. Connect the humidity/in-car temperature sensor 4P connector.
  3. Turn the ignition switch to ON (II). Measure the voltage between the terminals with the (+) probe on the No. 2 terminal and the (-) probe on the No. 3 terminal with the connector connected.
    Fig 1: Measuring Voltage Between Terminals With (+) Probe On No. 2 And (-) Probe On No. 3 Terminal
    G05487686Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the voltage is not as specified, replace the humidity/in-car temperature sensor (see HUMIDITY/IN-CAR TEMPERATURE SENSOR REPLACEMENT  ).
About FixVault