FixVault
Home › Acura › 2007 › RDX › Repair and Diagnosis › Body & Frame › Door Locks › Immobilizer System › Immobilizer-keyless Control Unit Replacement

Immobilizer-keyless Control Unit Replacement

NOTE: Requires PCM code and all of the client's keys.
  1. Remove the steering column covers (see COLUMN COVER REMOVAL/INSTALLATION ).
  2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
    Fig 1: Disconnecting 7P Connector From Immobilizer-Keyless Control Unit
    G05446558Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the two screws and the immobilizer-keyless control unit.
  4. Install the immobilizer-keyless control unit in the reverse order of removal.
  5. After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION ), and make sure the immobilizer system works properly.
About FixVault