FixVault
Home › Acura › 2007 › RDX › Repair and Diagnosis › Body & Frame › Seats › Power Lumbar Support › Motor Test

Motor Test

  1. Remove the driver's seat .

    2. '07-08 models (see  FRONT SEAT REMOVAL/INSTALLATION  ).

    '09 model (see  FRONT SEAT REMOVAL/INSTALLATION 

  2. Disconnect the 2P connector (A) from the lumbar support motor.
    Fig 1: Disconnecting 2P Connector From Lumbar Support Motor
    G05446533Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Test each motor by applying battery voltage and body ground to the terminals.
    Fig 2: Testing Each Motor By Applying Battery Voltage And Body Ground To Terminals
    G05446534Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the motor does not run or fails to run smoothly, replace it (see FRONT SEAT FRAME REPLACEMENT ).
About FixVault