Utility Pocket Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Put on gloves to protect your hands.
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
Take care not to scratch the trim and panels.

Remove the center console panel (see step 1 under CENTER CONSOLE REMOVAL/INSTALLATION ).
Remove the inner case (A), then remove the screws.

Fig 1: Removing Inner Case And Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull out the utility pocket (A), disconnect the ambient light bulb socket (B), then remove the pocket.

Fig 2: Pulling Pocket And Ambient Light Bulb Socket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the pocket in the reverse order of removal, and note these items:
- Make sure the bulb socket is connected securely.
- Make sure the ambient light wire harness is not pinched.