FixVault
Home › Acura › 2007 › RL › Repair and Diagnosis › Body & Frame › Seats › Power Lumbar Support › Motor Test

Motor Test

  1. Remove the front seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector from the lumbar support motor (A).
    Fig 1: Identifying Lumbar Support Motor And 2P Connector
    G05497205
  3. Test each motor by applying battery voltage and body ground to the terminals.
    Fig 2: Terminals Voltage Reference Chart
    G05497206
  4. If the motor does not run or fails to run smoothly, replace it (see FRONT SEAT LUMBAR SUPPORT REPLACEMENT ).
About FixVault