Switch Test/Replacement

Remove the center console panel (see CENTER CONSOLE REMOVAL/INSTALLATION ).
Disconnect the 6P connector from the seat heater switch (A).

Fig 1: Identifying Seat Heater Switch And 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the two screws and the switch.
Check for continuity between the terminals in each switch position (see Fig 2).

Fig 2: Checking For Continuity Between Terminals In Each Switch Position
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace the illumination bulbs (B) or the switch.