FixVault
Home › Acura › 2007 › RL › Repair and Diagnosis › External Pages › Different car › Section 15 (Automatic HVAC System) › Driver's Mode Control Motor Replacement

Driver's Mode Control Motor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION )
  2. Disconnect the TOP connector (A) from the driver's mode control motor (B). Remove the self-tapping screws and the driver's mode control motor from the heater unit.
    Fig 1: Identifying Top Connector And Driver's Mode Control Motor
    G05462493Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.
About FixVault