FixVault
Home › Acura › 2007 › RL › Repair and Diagnosis › External Pages › Different car › Section 15 (Automatic HVAC System) › Evaporator Temperature Sensor Replacement

Evaporator Temperature Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passenger's dashboard undercover (see GLOVE BOX HOUSING REMOVAL/INSTALLATION ).
  2. Disconnect the 4P connector (A) from the power transistor (B) then remove the self-tapping screws and carefully pull out the power transistor; Disconnect the 2P connector (C) from the evaporator temperature sensor (D), then remove the connector clip (E). Remove the self-tapping screw, and carefully pull out the evaporator temperature.
    Fig 1: Identifying 4P Connector, Power Transistor, 2P Connector, Evaporator Temperature Sensor And Connector Clip (E)
    G05462485Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install in the reverse order of removal.
About FixVault