FixVault
Home › Acura › 2007 › RL › Repair and Diagnosis › External Pages › Different car › Section 39 (Electronic Throttle Control System) › Throttle Actuator Control Module Replacement

Throttle Actuator Control Module Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box and panel (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Disconnect the throttle actuator control module 16P connector (A).
    Fig 1: Identifying Throttle Actuator Control Module 16P Connector
    G05458213Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (B), and the throttle actuator control module (C).
  4. Install the parts in the reverse order of removal.
About FixVault