Rearview Camera Removal/Installation

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear license trim (see REAR LICENSE TRIM REPLACEMENT ).
Inside the trunk lid, disconnect the connector (A), then remove the grommet (B) from the trunk lid and push the connector through the hole in the trunk lid.

Fig 1: Identifying Trunk Lid Connector And Grommet
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws and rearview camera (C).
Install the camera in the reverse order of removal.