DTC B1725: Display Panel Control Unit Temperature is too high

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Display panel control unit DTCs may not clear using the HDS. If the DTCs will not clear, manually reset the display panel control unit (see RESETTING THE DISPLAY PANEL ).
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN system diagnosis test mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

Turn the ignition switch to ON (II).
Clear for DTC with the HDS.
Turn the ignition switch to LOCK (0), and then back ON (II).
Park the vehicle avoiding the direct sunlight and cool down the in-car temperature.
Check for DTCs with the HDS.
Is DTC B1725 indicated?

YES -Replace the display panel control unit.

NO -Intermittent failure, the system is OK at this time.