Paddle Shifter - (Downshift Switch) Replacement

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) in the SRS before doing repairs or service.

1. Remove the steering wheel (see STEERING WHEEL REMOVAL ).
2. Remove the steering wheel rear cover (A).
   Fig 1: Identifying Steering Wheel Rear Cover And Paddle Shifter

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the paddle shifter - (downshift switch) connector from its holder, and disconnect the connector.
4. Remove the screw (B) securing the paddle shifter - (C), then remove and replace the paddle shifter -.
5. Install the new paddle shifter - with the screw, connect the connector, and install the connector in the holder.
6. Install the steering wheel rear cover.
7. Install the steering wheel (see STEERING WHEEL INSTALLATION ).