Speaker Test/Replacement: Tweeter

Carefully pry the tweeter grille (A) out from the dashboard. Be careful not to damage the tweeter grille and the dashboard.

Fig 1: Identifying Tweeter Grille And 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 2P connector (B) from the tweeter.
Remove the tweeter (A) from the tweeter grille.

Fig 2: Identifying 2P Connector From Tweeter
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check the capacitor (B) condition. If any malfunction is found, replace the tweeter.
Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor* There should be about 4 0,.

Fig 3: Measuring Resistance Between Tweeter Terminal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the resistance is not as specified, replace the tweeter.