Hood Latch Replacement

NOTE:

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Detach the clip and release the hooks (A), then remove the hood latch cover (B) from the hood latch (C).

Fig 1: Identifying Hood Latch Cover Fastener Location
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hood latch switch connector (A).

Fig 2: Disconnecting Hood Latch Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts, then remove the hood latch (A) from the body.

Fig 3: Removing Hood Latch From Body With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the hood opener cable (B) from the hood latch. Take care not to bend the cable.
Install the latch in the reverse order of removal, and note these items:
- Apply multipurpose grease to the hood latch as indicated by the arrows.
- Make sure the hood opener cable is connected properly and the hood latch switch connector is plugged in properly.
- Make sure the cable actuates the latch before you close the hood.
- Adjust the hood latch alignment (see step 4 in HOOD ADJUSTMENT ).
- Make sure the hood opens properly and locks securely.
  
  Fig 4: Applying Multipurpose Grease To Hood Latch
  Courtesy of AMERICAN HONDA MOTOR CO., INC.