FixVault
Home › Acura › 2007 › TL Base › Repair and Diagnosis › Brakes › Traction Control › VSA (Vehicle Stability Assist) System › VSA OFF Switch Test

VSA OFF Switch Test

  1. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ), and disconnect the VSA OFF switch 5P connector.
  2. Push out the VSA OFF switch (A) from the back of the dashboard lower cover (B).
    Fig 1: Identifying VSA OFF Switch And Dashboard Lower Cover
    G05461946Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity while the switch is pressed, and no continuity when the switch is released.
    Fig 2: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No 1 And 2
    G05461947Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check for continuity between VSA OFF switch 5P connector terminals No. 3 and No. 4. There should be continuity at all times.
    Fig 3: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No 3 And 4
    G05461948Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault