FixVault
Home › Acura › 2007 › TL Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Input Shaft (Mainshaft) Speed Sensor Replacement

Input Shaft (Mainshaft) Speed Sensor Replacement

  1. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor (A).
    Fig 1: Locating Input Shaft (Mainshaft) Speed Sensor With Torque Specifications
    G05458989Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install a new O-ring (B) on a new input shaft (mainshaft) speed sensor, then install the input shaft (mainshaft) speed sensor in the transmission housing.
  3. Check the connector for rust, dirt, or oil, then connect the connector securely.
About FixVault