Gauge Control Module Replacement

NOTE: Before replacing the gauge control module, do the "Rewriting the ODO Data on a New Gauge Control Module" (see REWRITING THE ODO DATA ON A NEW GAUGE CONTROL MODULE ).

Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Remove the screws from the gauge control module (A), and spread a protective cloth (B) on the upper column cover.

Fig 1: Identifying Gauge Control Module
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (C), and remove the gauge control module.
Install the gauge in the reverse order or removal.