Navigation Switch Panel Removal/Installation

Remove the center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
Remove the screws and navigation switch panel (A) from the center panel.

Fig 1: Identifying Navigation Switch Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws (A) and jog dial (B) from the interface dial (G).

Fig 2: Identifying Jog Dial, Interface Dial And Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connector (D), then remove the interface dial.
If necessary, remove the screws (E) and cover (F), then remove the bulbs.
Install the dial in the reverse order of removal.