Removal and Installation: Installation
- Install the relays and connect the connectors to the under-dash fuse/relay box, then install the under-dash fuse/relay box in the reverse order of removal.
- Install the removed parts in the reverse order of removal.
- Connect both the positive and negative cables to the battery.
- Register the immobilizer system with the HDS (see
IMMOBILIZER KEY REGISTRATION
).NOTE: The IMOES unit is built into the MICU which is part of the under-dash fuse/relay box. Because of this construction, the IMOES must be registered, or the vehicle will not start.
- Enter the anti-theft code for the audio or the navigation system, then enter the client's audio presets, and set the clock.
- Confirm that all systems work properly.