FixVault
Home › Acura › 2009 › CSX Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 15 (Fuel Supply System) › Low Fuel Indicator Test

Low Fuel Indicator Test

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Do the gauge self-diagnostic function (see SELF-DIAGNOSTIC FUNCTION )
    • If the low fuel indicator flashes, go to step 2
    • If the low fuel indicator does not flash, replace the gauge control module (see GAUGE CONTROL MODULE REPLACEMENT )
  2. Check for body electrical system DTCs
    • If any DTCs are indicated, do the indicated DTC's troubleshooting.
    • If no DTCs are indicated, go to step 3
  3. Do the fuel gauge sending unit test, without SH-AWD system (see FUEL GAUGE SENDING UNIT TEST ), with SH-AWD system (see WITH SH-AWD ) (With SH-AWD system and secondary fuel gauge sending unit test (see SECONDARY FUEL GAUGE SENDING UNIT TEST ))
About FixVault